Futurecom PDR8000 Programming Manual page 34

Field Name
Configure Deployments
Set Repeater Password
Reset Repeater Password
Display Unit
Keypad Lock Password
Keypad Lock Timeout
Menu Scroll RollOver
Backlight Timeout
Keypad Beep
Timeout for Menu
Deployments Menu
Channels Menu
Time/Date Menu
2022-08-25
PDR8000
Options / Units
Allows the user to
enable/disable
deployments as per the
PDR8000 Order. Any
Deployment can be copied
to any other Deployment.
Deployments can be reset
to factory default.
Set Password for the
PDR8000
Reset the PDR8000
Password.
Set Password to Lock the
keypad
0-60 Minutes The keypad gets locked
after the programmed time.
OFF
Enabled/Disabled When Enabled the Menu
can be scrolled over on the
display
0-60 Minutes The backlight will get timed
out after the programmed
0 Min
time.
Enabled/Disabled Enables/Disables Keypad
Beeps
5-60 Seconds The menu display will get
timed out after the
10 Sec
programmed time
The Deployment menu on
Enabled/Disabled
the Display panel is
Enabled or Disabled.
Enabled/Disabled The Channel menu on the
Display panel is Enabled or
Disabled
Enabled/Disabled The Time/Date menu on
the Display panel is
Enabled or Disabled
Document 8K088X04 R5.01
®
Portable Digital Repeater Programming Guide
Description
Opens a new window.
If 'Deployment Profile
Capability' is enabled.
Refer section 2.6.4.1.1 of
the PDR8000
Programming Guide
Refer Section 2.6.4.1.2
of the PDR8000
Programming Guide.
Notes
Page 34 of 86