Futurecom PDR8000 Programming Manual page 74

In the Monitoring window, select the PDR8000 operating mode 'Service', PTT: PTT ON.
Observe the RF Power in the Monitoring Window.
The Booster pack is still not connected to the PDR8000. The Booster pack State is OFF.
•
The Booster Pack is now connected to the PDR8000 and powered up.
The screen below indicates that the Booster pack is On and Active but the PDR8000 is
not transmitting (PTT OFF).
2022-08-25
®
PDR8000 Portable Digital Repeater Programming Guide
Document 8K088X04 R5.01
Page 74 of 86