Telemetry Output (Cofdm) - Safran RTR-NeXt User Interface Manual

4.6.10

Telemetry Output (COFDM)

Output Format
User Bit rate
Channel Rate is in read-only mode.
PCM Output Status or Flow Output Status (only
in "Ethernet" Output Format)
Reset Rate command
Channel rate status
This is the user bit rate, i.e. after destuffing.
PCM Output Status
Underflow means averaging function empties buffer too fast, please check whether User Bit Rate parameter
is not too low.
Overflow means averaging function buffer too slowly, please check whether User Bit Rate parameter is not
too high.
Destuff Error means ZDS telemetry frame is corrupted, and User data is certainly so.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 68