Table of Contents
Advertisement
Invert
Only if AM is selected
Note: The minimum AM delay value available depends on the IF filter bandwidth:
By default this value is set to 125 µs.
With IF filter bandwidth above 200 KHz, the AM delay can be set to 50 µs.
The AM delay is very important and should be set very carefully.
When the AM value setting is not compatible with the IF filter bandwidth, there is a minor alarm
displayed on the main page.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 145
Advertisement
Table of Contents
