4.7.19.1.2
The mission can be repeated.
While repeating the mission, the receiver has been already set to the step 3 of the previous chapter.
The configuration has been saved in a CTX document: See §4.3.4 .
In this case, it is just required to load the CTX configuration.
When starting the mission, the video outputs are saturated by noise.
And when the useful signal appears, the video outputs gains are already correctly set.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 154