Safran RTR-NeXt User Interface Manual page 96


IF Filter Bandwidth is available in Manual mode.

This field is not accessible in ARTM CPM, MS-FM
demodulator type. For these modulations, the IF
filter is automatically set versus the bit rate.

There are 29 available IF filters from 3 KHz to
40 MHz. (36MHz for RTR-NeXt-S)

RSR (Only active while using the IF inputs)

Enabled
connected to J47.
 Disabled  The RTR computes the AGC taking
into account the level of the received signal.

Select Automatic Gain Control Mode

AGC Time Constant is available in AGC Automatic
Mode

AGC Manual Gain is available in AGC Manual
Mode.

Select Automatic Frequency Control Mode

AFC Acquisition Bandwidth is available in AFC
Auto Mode
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
 The RTR uses the digital AGC
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev
Customer Ref.:
Date:
Safran Data Systems
This document is the property of
03
-
21/06/2021
.
Page 96