Safran RTR-NeXt User Interface Manual page 29

Popup window will automatically disappear after a few seconds if not used.

Select AGC Mode

Specifies manual command value
Possible selections:

Auto : the RTR uses the AGC time constant selected.

Manu : the user can set the gain inside the tuner boards.

Freeze : the current gain of the tuner board is fixed

NF Meas.: Specific AGC setup for Noise Figure measurement. A 10dB back of is taken on AGC to avoid
saturation with High gain diode.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 29