Safran RTR-NeXt User Interface Manual page 105

4.7.9.1 FM.
FM mode allows the user to configure the receiver with more versatility when compared to the PCM-FM
mode. This mode can be used to receive:

Analog video (ie. Baseband) signal

PCM data stream
Using FM mode, the user has to set the video filter output on the demodulated signal.

Using NRZL encoding, the video filter has to be set at 75% of the bit rate.

Using Biphase encoding, the video filter has to be set at 150% of the bit rate.

Any Bit Synchronizer could be used in stand-alone using the auxiliary inputs. The Bit Synchronizer data
rates are independent enabling to set different configuration for the 3 Bit Synchronizer.
Note : Equalizer cannot be activated in this mode.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 105