Equalizer Element - Safran RTR-NeXt User Interface Manual

4.6.4

Equalizer Element.

This element displays information about equalizer status

Input Selection

Equalizer activity

Equalization Quality

Effective bitrate

Equalizer reset
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.:
Date: 21/06/2021
Default value is combined. But it is possible to select
either Ch1 or CH2 as an input to Equalizer.
Green or Yellow : normal and minimum iteration
number
Orange : moderate iteration number
Red : maximum iteration number
This gives information about channel equalization
difficulty.
Eye opening after equalization.
This gives information about equalization result on
demodulated signal.
For best performance, equalizer needs to have an
accurate estimation of bit rate. An algorithm tracks the
bit rate drift and adjusts it permanently.
ZDS recommands to reset the equalizer after the
transmission is established.
Safran Data Systems
-
.
Page 33