Safran RTR-NeXt User Interface Manual page 115

4.7.9.5 PM.
PM mode allows the user to configure the receiver in order to receive Analog video (ie. Baseband)
signal.
In this mode Bit synchronizer are not available and the demodulated signal will be available on video outputs.
A video low pass filter can be selected in the PM demodulator to reduce the output noise.

Carrier Acquisition Range

Video Filter Bandwidth

PM modulation Index
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Low or High
Safran Data Systems
.
Page 115