Safran RTR-NeXt User Interface Manual page 35

4.6.5.2 PCM FM.

Bit Rate for each chain present.
Maximum bit rate : 30 Mbps

The peak frequency Deviation is in read-only
mode for each chain present.

Carrier Offset is in read-only mode for each chain
present.

Bit Sync. Status is a specific status per present
chain.

Frame Sync. Status is a specific status per
present chain.

Reset Acquisition is a command applicable for
each chain present.

Left-clicking on this button opens the following
popup window with additional parameters
Popup window will automatically disappear after a few seconds if not used.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 35