Safran RTR-NeXt User Interface Manual page 71

When the zeroing function is activated, it is possible to switch the display between absolute dBm level
and signal Strength relatively to zeroing level.

Zeroing activated and strength mode Inactive
The level bars are "black" when the RF level value

is the Noise level reference when the zeroing is
activated.

The level bars are red when the RF level is under
the reference noise level.

When the RF level is above the Noise level the
difference appears in light green.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
Safran Data Systems
.
Page 71