Table of Contents
Advertisement
4.7.10
Bit Sync. Settings.
Enable or Disable current Bit Sync, only in FM and
FM S/C.
Enable or Disable current Bit Sync, only in FM and
FM S/C.
Input Selection, only in FM.
List of values is dynamic according configuration:
Demod 1, 2 are not available in Light Hardware
Version or Mono-Channel.
Demod 3 is not present in Independent Mode.
Post-D is not selectable in Independent Mode,
Light Hardware Version, or Mono-Channel.
Input Coupling, only in FM, FM S/C and PCM-FM.
Bit Rate, in this popup, is only in FM and FM S/C.
Note : Useful bitrate, to get the real Transmitted bit
rate according to selected FEC, see RX-1 and RTR
user manuals.
Loop Filter Bandwidth.
Matched Filter Type, all Demod Types except MS
FM, ARTM CPM, SOQPSK and GMSK.
Matched Filter Roll Off Factor, all Demod Types
except MS FM, ARTM CPM, SOQPSK and
GMSK.
Only available if the previous type is RC or RRC.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 131
Advertisement
Table of Contents
