4.7.21.4
RF Translator Settings.
Test Frequency
Only on if Band S is selected in the Tuner.
Output Selection
In addition to the activating the popup, it is possible to activate the RF Translator: on the button
Activate RF Translator
Available only for input frequency greater than
200MHz selected in the Tuner.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 164