ENGLISH
Adjusting the tilt angle
The Neox Dynamic wheelchair can be tilted backwards. Follow these instructions to
safely tilt the wheelchair.
1. Before tilting the wheelchair,
engage wheel locks A.
2. Activate
tilt
pressing
and
activation
simultaneously.
3. Once the desired tilt angle is
obtained, release both activation
levers B.
4. If needed, the maximum tilt
angle can be limited (see section
Limiting the tilt angle).
WARNING
Never replace parts of the tilt mechanism when in an inclined position.
•
When adjusting the tilt angle, make sure no objects are underneath or
•
close to the tilt mechanism.
mechanism
by
holding
both
B
levers
NEOX
TM
54
Dynamic wheelchair