Owner's Manual
4. Instructions
Required tools
Our wheelchairs are designed to be easily adjusted and maintained with standard
hand tools.
The following tools are required:
• Metric wrenches: 4 mm, 8 mm, two 10 mm wrenches,
two 13mm wrenches and a 19 mm wrench
• Metric Allen keys: 2,5 mm, 3 mm, 4 mm, 5 mm and10 mm
• Imperial wrenches: 7/16''et 3/4'', 1 ⅛''
• Imperial Allen keys: 7/64'', 1/4'', 7/16''
• Two 3/4" socket wrenches
• 19 mm reversible ratchet
• Phillips screwdriver
WARNING
Never use pneumatic or electric tools, these may damage your wheelchair.
•
WARNING
All modifications made to your wheelchair must be performed by a
•
qualified technician. Failure to observe this warning may lead to serious
injury to the occupant or any other individual who is near the wheelchair.
Be careful not to pinch your fingers when installing a wheelchair
•
component or using a removable part.
27
ENGLISH
Revision 0
July 2022