Installing Caster Wheels - Physipro NeoX DYNAMIC Owner's Manual

Owner's Manual

Installing caster wheels

1. Determine the correct position of the caster
wheel (see section Seat-to-Floor Height).
2. Insert screw A in the appropriate adjustment
with spacers B placed in between the
hole
caster wheel and the
Install nut C onto screw A and tighten with
3.
two 13mm wrenches.
Note - Once tightened, make sure the wheel rotates easily.
WARNING
• Changing a front caster wheel for a wheel with a different width may
require replacing the fork.
• All modifications made to your wheelchair must be performed by a
qualified technician. Failure to observe this warning may lead to
serious injury to the occupant or any other individual who is near the
wheelchair.
• If your wheelchair is equipped with pneumatic caster wheels, check
tire pressure weekly, as recommended in the Maintenance Checklist
Never use your wheelchair without properly inflate tires, the
recommended tire pressure is indicated on the outer tire. Overinflated
tires can burst, while under inflated tires can deform. Tire deformation
can cause the wheel to spin unexpectedly, this can potentially lead to
a loss of control of your wheelchair. Proper inflation will extend the
lifespan of your tires and improve ease-of-use.
fork.
39
ENGLISH
Revision 0
July 2022