Table of Contents
Advertisement
Owner's Manual
Armrest
'' U '' type armrest
The « U » type armrest is made with a foam padding to improve comfort and can be
flipped back to facilitate transfers.
The « U » type armrest offers a height adjustment range between 6 ¾'' and 16 ½''
(152 mm and 406 mm). Adjustable in increments of ½''.
Installing the '' U '' type armrest
1. With a 4mm Allen key, unfasten
screw A while holding nut B in place
with a 10mm wrench.
2. Position
receiver
positioning plate.
3. Reinsert
screw
receiver, positioning plates and seat
rail.
4. Place nut B on screw A and firmly
tighten using a 4mm Allen key and a
10mm wrench to hold nut B in place.
5. With two 10mm wrenches, place
receiver F at the front of the seat rail.
Flipping back the ''U'' type armrest
1. Press lever G.
2.
Flip-back armrest.
Adjusting the ''U'' type armrest height
1. Press lever H.
2. Raise or lower armrest.
3. Release lever H to lock armrest in
place once the desired height is
obtained.
Note – Make sure armrest is fully
engaged in the adjustment holes and
that set screw I is firmly tightened.
C
on
the
A
through
the
57
ENGLISH
Revision 0
July 2022
Advertisement
Table of Contents
