Pelvic Positioning Belt; Installing The Pelvic Positioning Belt; Adjusting The Pelvic Positioning Belt - Physipro NeoX DYNAMIC Owner's Manual

ENGLISH

Pelvic Positioning Belt

The primary function of the pelvic positioning belt is to help the occupant maintain a
proper posture and to secure the occupant in the wheelchair.

Installing the pelvic positioning belt

Position the belt end A on the seat rail
and tighten screw B with a 4mm Allen
key.

Adjusting the pelvic positioning belt

To adjust the length of the positioning belt, slide the belt strap C into the plastic slide
buckle D and tighten or loosen until the belt fits snugly without causing any
discomfort.
WARNING
• When using your wheelchair, it is important to always fasten your
positioning belt for added protection.
• It is important to adjust your positioning belt to maximize comfort
and safety.
• Improper use can result in serious injury or death.
NEOX TM
42
Dynamic wheelchair