Folding The Flip-Up Footplate; Adjusting Footplate Depth; Adjusting The Horizontal Angle Of The Footplate; Adjusting The Vertical Angle Of The Footplate - Physipro NeoX DYNAMIC Owner's Manual

ENGLISH

Folding the flip-up footplate

To fold the footplate, simply flip the
footplate upwards.

Adjusting footplate depth

1. With a 4mm Allen key, unfasten and
remove both screws D.
2. Position the footplate and insert both
screws D in the appropriate adjustment
holes and tighten screws firmly.

Adjusting the horizontal angle of the footplate

1. With a 4mm Allen key, loosen both
screws D, without removing them.
2. Pivot the footplate until the desired
horizontal angle ß is obtained.
3. Firmly tighten both screws D.

Adjusting the vertical angle of the footplate

With a ¼"Allen key, turn plastic screw E to
obtain the desired vertical angle.
-
Turning screw E clockwise
increase the angle.
-
Turning screw E counterclockwise will
decrease the angle.
WARNING
Never lift the wheelchair by the footrest. Damage or injury may occur.
Always use the rigid parts of the frame when lifting the wheelchair.
NEOX
will
60
TM Dynamic wheelchair