Table of Contents
Advertisement
Owners manual
5.3 Front Casters Adjustment
Four-hole caster forks allow a seat height adjustment.
Follow these steps :
Unscrew screw A with two 13 mm wrenches
1.
2.
Position the wheel in one of the preset
holes when the desired height is reached.
3.
Reinstall according to section 7.1 instruction.
Note - Once installed, the wheel should
turn easily.
5.4 Caster Angle Adjustment
To allow easier propulsion, the caster housing should always be at a 90º angle
to the oor (perpendicular to the ground).
With a 10mm wrench, untighten screws A and B as much as possible.
1.
Rotate the special hexagonal nuts C and D so that the fork E has a 90º angle
2.
with the oor.
3.
When the alignment is correct, retighten screws A and B.
4.
Repeat the process for the other caster
A
B
Figure 13 : Square the Front Forks
17
A
Figure 12 : Changing the front wheels' position
C
D
ENGLISH
E
Revision 4
January 2015
Advertisement
Table of Contents
