Owner's Manual
Elevating and Articulating Legrest
Installing the legrest
1. Install tube end A into the receiver on
the front frame tube.
2. Turn the legrest inwards until the
legrest locks in place.
Adjusting legrest height at knee
level
1. With a 2.5mm Allen key, unfasten all 4
bolts B.
2. Place the upper part of the legrest
onto tube.
3. Position the legrest at the desired
height and insert bolts B in the
appropriate adjustment holes.
4. Tighten all 4 bolts B firmly.
Adjusting legrest length
1. With a 4mm Allen key, unfasten screws
C.
2. Raise or lower the inner adjustment
tube until the desired length is
obtained.
3. Reinstall screws C in the appropriate
adjustment holes and tighten firmly.
Removing legrest
1. Pull lever D towards you and turn
legrest inwards or outwards.
2. Lift the legrest upwards until it is
completely removed from the receiver.
Adjusting legrest angle
- To increase angle, lift the legrest
upwards.
- To decrease the angle, press and hold
E
lever
and
downwards.
push
the
legrest
61
ENGLISH
Revision 0
July 2022