Table of Contents
Advertisement
Owner's Manual
Adjusting the stroller bar angle:
To adjust the stroller bar angle, simply press both push buttons A simultaneously.
This will allow the stroller bar to move freely. Once the desired angle is obtained,
release both push buttons A and the stroller bar will automatically lock into place.
WARNING
Never lift or pull your wheelchair with the stroller bar. The stroller bar was
designed to push and steer the wheelchair only. Improper use may
damage or break the stroller bar and can result in injury.
Installing an activation lever
1.
Position
both
activation levers on the push
handle or stroller bar.
2.
With a Philips screwdriver, firmly
tighten both screws A.
To remove activation levers, remove
screws A and separate both parts.
parts
of
the
51
ENGLISH
Revision 0
July 2022
Advertisement
Table of Contents
