Table of Contents
Advertisement
Owner's Manual
Footrest
The footrest is removable and can swivel inwards or outwards and can be equipped
with a standard flip-up footplate or a flip-up footplate with angle and depth
adjustments. Three models of footrest are available: 60º, 70º et 90º.
Each model features an extensive range of adjustments to ensure optimal support of
the lower limbs.
Footrest 60º: 11 ¼'' to 21'' (280 mm to 530 mm)
Footrest 70º: 10 ¾'' to 20 ½'' (255 mm to 508 mm)
Footrest 90º: 10 ½'' to 20 ½'' (254 mm to 508 mm)
Adjustable in increments of ½''.
Installing the footrest
1. Insert pivot saddle A into the
receiver on the front frame
tube.
2. Turn the footrest inwards until
the footrest locks in place.
Removing the footrest
1. Press and hold lever B while
turning the footrest outwards.
2. Lift the footrest upwards until
it is completely removed from
the receiver.
Adjusting footrest length
1. With a 10mm Allen key,
remove screw C.
2. Raise or lower the inner
adjustment tube until the
desired length is obtained.
3. Reinstall
screw
appropriate adjustment hole
and tighten firmly.
C
in the
59
ENGLISH
Revision 0
July 2022
Advertisement
Table of Contents
