Owner's Manual
Installing the tension bar
1. With a 3mm Allen key, remove screws A.
2. Install the tension bar tubes B onto central tube C.
Insert screws D in the pre-drilled holes of the back
3.
posts and through the ends of the tension bar tubes.
4. With a 4mm Allen
5. With a 3mm Allen
To remove tension bar, completely unfasten and remove screws D.
Installing a headrest support mounting fixture on the tension bar
1. Position both parts E and F of the headrest mounting
fixture onto the central tube C of the tension bar.
2. With a 5mm Allen key, secure the headrest mounting
fixture by firmly tightening all 4 screws G.
key, firmly tighten screws D.
key, firmly tighten screws A.
49
ENGLISH
Revision 0
July 2022