Modifying Seat Width (Option) - Physipro NeoX DYNAMIC Owner's Manual

Owner's Manual

Modifying seat width (option)

The seat width of
of frames are available
increments of 1":
Standard frame: 14" to 22" (356 to 559 mm)
Extended frame: 19" to 22" (482 to 559 mm)
Heavy Duty frame: 19" to 26" (482 to 660 mm)
1. With a 3mm Allen key and an 8mm
wrench, unfasten bolts A.
2. Remove seat plates B.
3. With two 13mm wrenches, unfasten
bolts C.
4. With two 13mm wrenches, unfasten
screws D.
5. With a 3mm Allen key, unfasten both
central screws of the backrest tension
bar (see section Installing the tension
bar).
6. If a stroller bar is installed, unfasten both
central screws with a 4mm Allen key (see
section Installing the stroller bar).
7. Simultaneously widen or narrow the
adjustable frame rails, the tension bar
and stroller bar, if applicable, to obtain
the desired seat width.
8. Reinsert bolts C and D, the tension bar's
central screws and the stroller bar's
central screws, if applicable.
9. Reposition seat plates B and reinsert
bolts A.
10. Firmly tighten bolts A, C and D, as well
as the tension bar's central screws and
the stroller bar's central screws, if
applicable.
Note – The tension bar, stroller bar and seat plates can limit the seat width adjustment
range.
Neox Dynamic wheelchair can be modified.
the
and offer
the following seat width adjustment ranges in
41
ENGLISH
Three types
Revision 0
July 2022