Table of Contents
Advertisement
Owner's Manual
Anti-Tips
Physipro Inc. recommends the installation of anti-tips on all wheelchairs.
Installing anti-tips
1. Press button pin A, so that the lock pin is
drawn inside the tube.
2. Insert anti-tip into the receiver.
3. Slide and turn the anti-tip tube until the
button pin A and lock pin are positioned
through the receiver's mounting hole.
4. Repeat the process for the second anti-
tip.
Adjusting anti-tips
Once anti-tips are installed, it is important to
adjust their height.
1. Press button pin B and raise or lower the
anti-tip's adjustment tube until button
pin B is positioned in the adjustment
hole corresponding to desired height.
2. Repeat the process for the second anti-
tip.
Note
-
For
maximum
recommended that anti-tips be installed
no higher than 2" above the ground.
Removing anti-tips
To remove the anti-tips, simply press on
button pin A and pull anti-tip downwards
until completely extracted from the receiver.
safety,
it
is
65
ENGLISH
Receiver
Revision 0
July 2022
Advertisement
Table of Contents
