Advertisement
The Simulator
Base Tilt :
The base tilt is operated by the handles located on the tubes, which support the
headrest. The 2 handles A must be operated to allow tilting the base. Use the
goniometer located on the stabilizer bar to read the tilt angle.
A
Ө
A
Ө
θ Max : 30º positive (backward)
θ Min : 10º negative (forward)
________________________________________
Backrest Inclination :
Use the levers B located on the push handles to release the mounting tubes and
allow the backrest's inclination. Use the goniometer located on the lower mounting
tubes to read the inclination angle.
Ө
B
Ө
B
θ Max : 85º positive (backward)
θ Min : 145º negative (forward)
Advertisement
