Front Casters Adjustment; Caster Angle Adjustment - Physipro XL5 Owner's Manual

Owners manual

5.3 Front Casters Adjustment

Four-hole caster forks allow a seat height adjustment.
Follow these steps :
Unscrew screw A with two 13 mm wrenches
1.
2. Position the wheel in one of the preset
holes when the desired height is reached.
3. Reinstall according to section 7.1 instruction.
Note - Once installed, the wheel should
turn easily.

5.4 Caster Angle Adjustment

To allow easier propulsion, the caster housing should always be at a 90º angle
to the floor (perpendicular to the ground).
With a 10mm wrench, untighten screws A and B as much as possible.
1.
Rotate the special hexagonal nuts C and D so that the fork E has a 90º angle
2.
with the floor.
3. When the alignment is correct, retighten screws A and B.
4. Repeat the process for the other caster
A
B
Figure 13 : Square the Front Forks
17
A
Figure 12 : Changing the front wheels' position
C
D
ENGLISH
E
Revision 5
December 2015