Table of Contents
Advertisement
Owners manual
8.7 Folding Stabilizer Bar
8.7.1 Installation
1. Cut both ends of the rubber handle.
2. Insert the aluminum spacers A at the end of each handle.
3. With a 4 mm Allen key, tighten screw B.
8.7.2 Folding
1. Press push-button C.
2. Rotate handle D to keep button C depressed.
3. Press push-button E.
4. Slide handle D right or left.
B
A
D
E
C
Figure 26 : Folding Stabilizer Bar Installation
27
ENGLISH
Opened position
Revision 5
December 2015
Advertisement
Table of Contents
