System Menu Function - ITech IT6000B Series User Manual

1.8 System Menu Function

This Chapter offers a general introduction of system menus, allowing users to
have a preliminary understanding of system functions of this IT6000B series.
The steps of the system menu function are as follows:
AUTO
Speed= High/
Loop speed setting: high speed / low speed.
Low
On Delay Set the delay time to turn on the input.
Off Delay Set the delay time to turn off the input.
Set the current rising time. (only displayed
I-Rise Slope
under the CC Mode)
Set the current falling time. (only displayed
I-Fall Slope
under the CC Mode)
Set the voltage rising time. (only displayed
V-Rise Slope
under the CV Mode)
Set the voltage falling time. (only displayed
V-Fall Slope
under the CV Mode)
Set the power rising time. (only displayed
P-Rise Slope
under the CP Mode)
Set the power falling time. (only displayed
P-Fall Slope
under the CP Mode)
Set the resistance rising time. (only displayed
R-Rise Slope
under the CR Mode)
Set the resistance falling time. (only displayed
R-Fall Slope
under the CR Mode)
Von Set Von function
Latch
Living
Copyright © Itech Electronic Co., Ltd.
CC+CV+CW+CR complex operation
mode
Latch mode
Level=0.00V Set the Von value
Living mode
Level=0.00V Set the Von value
Quick Reference
13