Options Introduction - ITech IT6000B Series User Manual

Ext-Program
System Reset
System Rzero
System Info
AC-Meter
Disp on timer

1.9 Options Introduction

The IT6000B series Regenerative Power System supports the following types
of optional accessories (sold separately), the details are as below:
•
IO-2. Ps, Not-Invert
IO-3. Off-Status, Not-
Invert
IO-4. Ext-Trig, Not-
Invert
IO-5. INH-Living, Not-
Invert
IO-6. Sync-On, Not-
Invert
IO-7. Sync-Off, Not-
Invert
External Analog Function. This function is optional. The menu can only
display when corresponding board card is inserted. For details, see
6.12 Source Analogue Function (Ext-Program) (Optional)
dAnalogue Function (Ext-Program)
Select whether to restore the factory default settings or not.
Used to control whether the voltage is quickly zeroed (Source mode
only) after the output is turned off.
•
Off: No
•
On: Yes
View the system information. For details, see
formation (System Info).
Observe power grid information (Load mode only).
Display Display the current regenerative power value.
Clear Clear the total current regenerative power value.
Screen displays loading time (Load mode only).
On Turn the display on.
Off Turn the display off.
Optional interface card
– IT-E166: Interface card for GPIB communication. When users need to
use GPIB communication, they can choose to purchase this accessory.
For details, see 2.6.4 GPIB Interface
Copyright © Itech Electronic Co., Ltd.
Function setting of pin 2
Function setting of pin 3
Function setting of pin 4
Function setting of pin 5
Function setting of pin 6
Function setting of pin 7
(Optional).
6.15 View the System In-
(Optional).
Quick Reference
and 6.13 loa-
18