Set The Input-On/Input-Off Delay Time （On Delay/ Off Delay; Set I-Rise / I-Fall Slope（I-Rise / I-Fall Slope - ITech IT6000B Series User Manual

5.1.4 Set the Input-On/Input-Off Delay Time （On Delay/ Off
Delay）
You can set the input-on/input-off delay time within the range from 0 second to
60 seconds.
•
•
The procedures to set the input delay time are as follows.
1. Press [Shift]+[V-set]（Config） to enter into the configuration menu
2. Use knob or up and down keys to select On Delay or Off Delay and press
3. Use knob or the number keys to adjust the input-on/input-off delay time and
5.1.5 Set I-Rise / I-Fall Slope（I-Rise / I-Fall Slope）
The I-Rise / I-Fall Slope indicates the rate in which the current setting value
changes to a new setting value, and it influences the rate of the real time cur-
rent, triggering current and the dynamic current.
The procedures to set I-Rise / I-Fall Slope are as follows.
1. Press [Shift]+[V-set]（Config） to enter into the configuration menu
2. Use knob or up and down keys to select I-Rise Slope or I-Fall Slope and
3. Use knob or the number keys to adjust the I-Rise / I-Fall Slope and press
On Delay is from the time that a command to turn on the input is received un-
til the input actually turns on.
Off Delay is from the time that a command to turn off the input is received un-
til the input actually turns off.
interface.
[Enter] to confirm.
press [Enter] to confirm.
interface.
press [Enter] to confirm.
[Enter] to confirm.
Copyright © Itech Electronic Co., Ltd.
Load Function
153