Battery Charging/Discharging Test Function - ITech IT6000B Series User Manual

•
•

4.6.2 Battery Charging/Discharging Test Function

The IT6000B series power system provides the battery charging/discharging
test function based on its unique bidirectional power supply properties. Suitable
for charging/discharging tests on all types of portable batteries.
7. Select the USB and press [Enter].
At this point, the system will automatically read all the List files in the root
directory of the USB flash drive. The interface is displayed as follows:
XXX.csv
Not-Load Load
XXX indicates the name of the List file; YY indicates the serial number of
the current List file; ZZ indicates the total number of the List file.
8. Press the Up/Down key to select the file.
9. Press the Left/Right key to select Load, press [Enter] to complete the
import, and wait for the trigger to run this file.
10. Turn on the [On/Off].
11. Based on the selected trigger method, perform the trigger operation.
Programming via SCPI instructions
For detailed instructions and parameter introduction, please refer to the in-
structions of "ARB Subsystem" in the Programming Guide.
Realized by the software IT9000 on PC
For detailed function usage, please refer to IT9000–PV6000 User Manual.
Copyright © Itech Electronic Co., Ltd.
YY/ZZ
Power Supply Function
78