System Menu Function - ITech IT6000C Series User Manual

1.8 System Menu Function

This Chapter offers a general introduction of system menus, allowing users to
have a preliminary understanding of system functions of this IT6000C series.
The steps of the system menu function are as follows:
1. Press the composite keys [Shift]+[P-set] (System) on the front panel to en-
2. Press [Enter] on a menu interface to enter the setting interface.
3. After the menu items are set, press [Enter] again to save the modified
The description of the menu items is shown in the table below.
Beep
PowerOn
Sense
ListTrig Source
ter the system menu.
At this point, the VFD screen displays the system menu items. Each menu
item has a numbering identifier. The user can press Up and Down buttons or
use the knob for scrolling display of other menu items.
contents.
You can press [Esc] to return to the previous menu.
Set the beeper state.
Turn the beeper on.
On
Turn the beeper off.
Off
Set the power-on state.
When the instrument is powered on, the instrument will in-
Reset
itialize some settings and [On/Off] state.
When the instrument is powered on, the instrument will re-
main the same settings and [On/Off] state as last time
Last
you turned off the instrument.
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
Last+Off
strument, but the [On/Off] is OFF state.
Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
Set the trigger method for the List files running.
Manual trigger
Manual
Bus trigger
Bus
External trigger
External
Copyright © Itech Electronic Co., Ltd.
Quick Reference
11