ITech IT6000B Series User Manual page 27

Voltage
Current
External
I/O Set the communication information between instrument and PC.
USB
LAN
Voltage trigger
Current trigger
External trigger
USB communication interface
USB-TMC protocol
TMC
Virtual serial port
VCP
Display as the following format:
baud rate_data bit_parity bit_stop bit.
•
•
•
•
Virtual LAN communication. After selecting
this option, you also need to set the commu-
nication parameters of the LAN, and the
LAN
menu items are the same as those in the
LAN menu (see below).
LAN communication interface
Info View the LAN information.
LAN Status: Down
IP Mode: Auto
IP: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP:INSTR
Socket Port: 30000
Configure LAN IP information.
IP-Conf
IP-Mode
Copyright © Itech Electronic Co., Ltd.
Select the baud rate from the following
options: 4800, 9600, 19200, 38400,
57600, 115200
Select the data bit from the following op-
tions: 5, 6, 7, 8
Select the parity bit from the following
options: N, O, E
Select the stop bit from the following op-
tions: 1, 2
Configure LAN IP mode.
Auto: automatically configure
the address of the instrument.
Quick Reference
15