Table of Contents
Advertisement
Table 17. Topology window switch module and status icons (continued)
Switch module icon
Active Zoneset Data window
The Active Zoneset Data window displays the zone membership for the active zone set that resides
on the fabric management switch. The active zone set is the same on all switch modules in the fabric.
You can confirm this by adding a fabric through another switch module and comparing Active Zone
Set displays.
To open the Active Zoneset Data window, click the Active Zoneset tab below the data window in the
Topology window. See "Zoning a fabric" on page 83 for more information about zone sets and
zones. See "Configured Zonesets Data window" on page 98 for information about the zone set
definitions on a specific switch module.
The Active Zoneset data window, shown in Figure 9 on page 83 uses display conventions for
expanding and contracting entries that are similar to the fabric tree. An entry handle to the left of an
entry in the fabric tree indicates that you can expand the entry. Click this handle or double-click the
following entries to expand or contract them:
• A zone set entry expands to show its member zones.
• A zone entry expands to show its member ports.
• A port entry expands to show the port Fibre Channel address.
• A Fibre Channel address entry expands to show the port worldwide name.
82
Description
Switch management communication unknown (blue)
Fabric management switch Ethernet connection normal (green)
Fabric management switch Ethernet connection critical (red)
Fabric management switch Ethernet connection warning (amber)
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
