Table of Contents
Advertisement
2. Click View and select Tile Graphs Horizontally. Tiling horizontally sizes and arranges the
graphs in the longest rows possible.
3. Click View and select Cascade Graph Panels. Cascading overlaps the graphs so that all graphs
are at least partially visible.
Customizing port performance graphs
You can customize the graph polling frequency, what is plotted in the graphs, and the graph color
scheme. Complete the following steps to customize the port performance graphs:
1. To set the polling frequency for all graphs, click Graph and click Set Polling Frequency.
2. Type an interval, in seconds (0 through 60), and click OK.
3. To select what is to be plotted, click Graph and click Options. The Modify Graph Display
window opens.
Figure 24. Modify Graph Display window
4. To modify the graph display, select the units for the graph:
• Select the Show Bytes Data on Graph check box to plot data in KB per second.
• Select the Show Frames Data on Graph check box to plot data in frames per second.
5. Choose what data type to plot. For example, if you selected Show Frames Data on Graph in
step 4 you can plot one or all of the following:
• Total frames transmitted and received (Total Frames)
• Total frames transmitted (Total Tx Frames)
• Total frames received (Total Rx Frames)
In addition to these, you can also plot total errors by selecting the Total Errors check box.
6. Display or hide the unit grid. Select the Display Grid on Graph check box to display the unit
grid.
7. Choose the color scheme for the graph. You can select the color for each data type, the unit grid,
and the background by clicking the corresponding color field or button. In each case, you can
126
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
