Table of Contents
Advertisement
Date command
Displays or sets the blade server date and time. To set the date and time, you must provide the
information string in this format: MMDDhhmmCCYY, where MM = month, DD = day, hh = hour,
mm = minute, CC = century, and YY = year. You must reset the switch for the new date to take effect.
Authority
Admin to change the date; user to display the date.
Syntax
date
[MMDDhhmmCCYY]
Keywords
[MMDDhhmmCCYY]
Specifies the date – this requires an admin session. If you omit [MMDDhhmmCCYY], the current
date is displayed – this is available with User authority.
Examples
The following is an example of the Date command.
FCSM: user1> date
Thu Sep 26 07:51:24 2002
12
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
