Using The Faceplate Window - Intel SBCEFCSW Hardware Maintenance Manual

You can save a custom arrangement, or layout, and restore that layout during a SAN Utility session.
To create a custom arrangement, arrange the icons; then, click View → Remember Layout. To
restore the saved layout, click View, clear the Toggle Auto Layout check box, and click Layout
Topology.
Selecting switch modules and links
Selected switch module icons are highlighted in violet. Selected ISLs are highlighted in amber. You
can select switch modules and links by performing the following tasks:
• To select a switch module or a link, click the icon or link.
• To select multiple switch modules or links, hold down the Ctrl key and click the switch modules
or links that you want.
• To select all switch modules or links, right-click in the graphic window background. Click
Select All Switches or click All Links from the pop-up menu.
To cancel a selection, press and hold the Ctrl key, and select the item again. To cancel multiple
selections, click in the graphic window background.
Topology data window tabs
The Topology Data window contains four tabs at the bottom of the window. When you click a tab,
the following information is displayed:
• Name Server - Click the Name Server tab to display all devices that are logged with the name
server and their location within the current fabric configuration. See "Name Server Data
window" on page 111 for more information about your configuration.
• Active Zoneset - Click the Active Zoneset tab to display the active zone set for the fabric,
including zones and their member ports. See "Active Zoneset Data window" on page 82 for
more information about this data window. See "Zoning a fabric" on page 83 for information
about zone sets and zones.
• Switch - Click the Switch tab to display the current network and switch module configuration
data for the selected switches. See "Switch Data window" on page 96 for more information.
• Link - Click the Link tab to display the current link status for the selected switch modules in the
fabric.

Using the Faceplate window

The Faceplate window shown in Figure 7 on page 75 and described in this section displays the
switch module name and operational state and the port status. The following functional elements are
displayed in the Faceplate window when you click on the Data window tabs:
• Port views and status
• Working with ports
• Faceplate data windows
74
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide