Table of Contents
Advertisement
Zoneset command
Manages zone sets and zone set membership across the fabric.
Authority
Admin authority and a Zoning Edit session. See the "Zoning command" on page 64 for information
about starting a Zoning Edit session. The Active, List, Zones keywords are available with User
authority. You must close the Zoning Edit session before using the Activate and Deactivate
keywords.
Syntax
zoneset
activate [zone_set]
active
add [zone_set] [zone_list]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deactivate
delete [zone_set]
list
remove [zone_set] [zone_list]
rename [zone_set_old] [zone_set_new]
zones [zone_set]
Keywords
activate [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active zone set. Close
the Zoning Edit session before using this keyword.
active
Displays the name of the active zone set. This keyword is available with User authority and does
not require a Zoning Edit session.
add [zone_set] [zone_list]
Adds a list of zones and aliases given by [zone_list] to the zone set given by [zone_set]. Zone
and alias names are delimited by spaces in [zone_list]. This keyword requires a Zoning Edit
session.
copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the membership from the
zone set given by [zone_set_source]. This keyword requires a Zoning Edit session.
create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name must begin with a letter
and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, &, _, and -. This
keyword requires a Zoning Edit session. The zoning database supports a maximum of 256 zone
sets.
deactivate
Deactivates the active zone set. Close the Zoning Edit session before using this keyword.
62
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
