Table of Contents
Advertisement
Figure 4. Fabric tree
Each fabric tree entry has a small icon next to it that uses color to indicate the following operational
status:
• A green switch module entry icon indicates that the switch is in normal operation.
• A green switch module entry icon indicates that the switch has a communications failure.
• A red switch
• A blue switch module entry icon indicates that the switch status is Unknown or that security is
enabled on the switch module but security is disabled on the fabric management switch.
• An amber switch module entry icon indicates that the switch is operational with errors.
You can use the fabric tree to access any fabric or switch module using the Topology or Faceplate
window. You can click a fabric entry to open the Topology window from the fabric tree. You can
click a switch module entry to open the Faceplate window from the fabric tree.
Graphic window
The graphic window as shown in Figure 1 on page 68 shows graphic information about fabrics and
switch modules such as the fabric topology and the switch faceplate. To adjust the window length,
click and drag the window border that it shares with the data window.
Data window and tabs
The data window as shown in Figure 2 on page 68 displays a table of data and statistics associated
with the selected tab. Use the scroll bar to browse through the data. The window length can be
adjusted by clicking and dragging the border that it shares with the graphic window.
To adjust the column width, move the pointer over the column heading border shared by two
columns until a right/left arrow graphic is displayed. Click and drag the arrow to the desired width.
The data window tabs show options for the types of information that you can display in the data
window. These options vary depending on the display.
Intel® Server Switch Module SBCEFCSW
71
Advertisement
Table of Contents
