Intel SBCEFCSW Hardware Maintenance Manual page 105

4. Click Apply to save changes to the zoning database.
NOTE
You can use shortcut menus to remove a zone from a zone set or from all zone sets in the
database.
Removing a zone set
Removing a zone set from the database affects the member zones in the following ways:
• Member zones that are members of other zone sets are not affected.
• Member zones that are not members of other zone sets become members of the orphan zone set.
The orphan zone set is saved on the switch module.
Complete the following steps to remove a zone set from the database:
1. In the Faceplate window, click Zoning → Edit Zoning.
The Edit Zoning window opens.
2. In the Zone Sets tree, select the zone set to be removed.
3. Click Edit → Remove to remove the zone set.
4. Click Apply to save changes to the zoning database.
NOTE
You can use shortcut menus to remove a zone set from the database.
Removing all zoning definitions
To remove all zone and zone set definitions from the zoning database, use one of the following
methods:
• Click Edit → Remove All. In the Remove All window, click Yes to confirm that you want to
delete all zones and zone sets.
• Right-click the Zone Sets heading at the top of the Zone Sets tree, and select Clear Zoning
from the pop-up menu. Click Yes to confirm that you want to delete all zone sets and zones.
Managing zones
Managing zones involves the following tasks:
• Creating a zone in a zone set
• Adding zone members
• Renaming a zone or a zone set
• Removing a zone member
• Removing a zone from a zone set
• Removing a zone from all zone sets
• Changing zone types
NOTE
Changes that you make to the zoning database are limited to the managed switch module and
do not propagate to the rest of the fabric. To distribute changes to configured zone sets fabric-
wide, you must edit the zoning databases on the individual switch modules.
Intel® Server Switch Module SBCEFCSW
91