Table of Contents
Advertisement
support
Executes a series of commands that display a complete description of the switch, its
configuration, and operation. The display can be captured from the screen and used for
diagnosing problems. This keyword is intended for use at the request of your authorized
maintenance provider. The following commands are executed:
• Date
• Alias List
• Config List
• Date
• History
• Ps
• Show (About, Alarm, Backtrace, Chassis, Config Port, Config Switch, Dev, Dev Settings,
Domains, Donor, Fabric, Log, Log Settings, Lsdb, Mem, Ns, Perf, Port, Setup Mfg, Setup
Snmp, Setup System, Steering, Switch, Topology, Users)
• Uptime
• User Accounts
• Whoami
• Zoneset (Active, List)
• Zoning (History, Limits, List)
switch
Displays switch operational information.
topology
Displays all connected devices.
users
Displays a list of logged-in users. This is equivalent to the User List command.
version
Displays an introductory set of information about operational attributes of the switch. This
keyword is equivalent to the About keyword.
Examples
The following is an example of the Show Setup SNMP command.
FCSM: user1> show setup snmp
SNMP Information
----------------
Contact
Location
Description
Trap1Address
Trap1Port
Trap1Severity
Trap1Enabled
42
<sysContact undefined>
<sysLocation undefined>
Fibre Channel Switch Module
10.0.0.1
162
warning
False
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
