Table of Contents
Advertisement
Passwd command
Changes the password for a user account.
Authority
Admin to change the password for another account; user to change your own.
Syntax
passwd
[account_name]
Keywords
[account_name]
The user account name. You must open an admin session to change the password for an account
name other than your own. If you omit [account_name], you are prompted to change the
password for the current account name.
Examples
The following is an example of the Passwd command.
FCSM (admin) : user1> passwd user2
Press 'q' and the ENTER key to abort this command.
account OLD password
account NEW password (4-20 chars)
please confirm account NEW password:
password has been changed.
NOTE
If you lose the password for the account, contact Support (see Appendix A, "Getting help and
technical assistance," on page 159).
Intel® Server Switch Module SBCEFCSW
:
:
17
Advertisement
Table of Contents
