Table of Contents
Advertisement
Examples
The following is an example of the Set Setup SNMP command.
FCSM: user1> admin start
FCSM (admin) : user1> set setup snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
Contact
Location
Trap1Address
Trap1Port
Trap1Severity
Trap1Enabled
Trap2Address
Trap2Port
Trap2Severity
Trap2Enabled
Trap3Address
Trap3Port
Trap3Severity
Trap3Enabled
Trap4Address
Trap4Port
Trap4Severity
Trap4Enabled
Trap5Address
Trap5Port
Trap5Severity
Trap5Enabled
ReadCommunity
WriteCommunity
TrapCommunity
AuthFailureTrap
Do you want to save and activate this snmp setup? (y/n): [n]
The following is an example of the Set Setup System command.
FCSM: user1> admin start
FCSM (admin) : user1> set setup system
36
(string, max=32 chars)
(string, max=32 chars)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(True / False)
(dot-notated IP Address)
(decimal value)
(see allowed options above)
(True / False)
(string, max=32 chars)
(string, max=32 chars)
(string, max=32 chars)
(True / False)
[<sysContact undefined> ]
[<sysLocation undefined>]
[10.0.0.1
[162
[warning
[False
[0.0.0.0
[162
[warning
[False
[0.0.0.0
[162
[warning
[False
[0.0.0.0
[162
[warning
[False
[0.0.0.0
[162
[warning
[False
[public
[private
[public
[False
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
Advertisement
Table of Contents
