Table of Contents
Advertisement
Table 10. Set Config zoning parameters (continued)
Parameter
Default
Examples
The following is an example of the Set Config Port command.
FCSM: user1> admin start
FCSM (admin) : user1> config edit
FCSM (admin-config) : user1> set config port 0
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring Port Number:
------------------------
AdminState
LinkSpeed
PortType
TLPortMode
ISLSecurity
SymPortName
ALFairness
ARB_FF
InteropCredit (decimal value, 0-255)
ExtCredit
FANEnable
LCFEnable
MFSEnable
MFS_TOV
MSEnable
NoClose
IOStreamGuard (Enable / Disable)
VIEnable
CheckAlps
Finished configuring attributes.
This configuration must be saved (see config save command) and
28
0
(1=Online, 2=Offline, 3=Diagnostics, 4=Down) [Online
(1=1Gb/s, 2=2Gb/s, 3=Auto)
(TL / GL / G / F / FL / Donor)
(1=TLTargetMode, 2=TLInitiatorMode)
(Any / Ours / None)
(string, max=32 chars)
(True / False)
(True / False)
(dec value, increments of 11, non-loop only) [0
(True / False)
(True / False)
(True / False)
(decimal value, 10-20480 msec)
(True / False)
(True / False)
(True / False)
(True / False)
Description
Determines communication among ports/devices in
the absence of an active zone set. "All" enables all
ports/devices to communicate with one another.
"None" prohibits communication among
ports/devices.
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
]
[Auto
]
[GL
]
[TLTargetMode]
[Any
]
[Port0
]
[False
]
[False
]
[0
]
]
[True
]
[False
]
[True
]
[10
]
[True
]
[False
]
[Disabled
]
[False
]
[False
]
Advertisement
Table of Contents
