Intel SBCEFCSW Hardware Maintenance Manual page 21

Admin command
Opens and closes an admin session. The admin session provides commands that change the fabric
and switch configurations. Only one admin session can be open on the switch at any time. An
inactive admin session will time out after a period of time that can be changed using the Set Setup
System command. See the "Set Setup command" on page 34.
Authority
Admin
Syntax
admin
start
end
cancel
Keywords
start
Opens the admin session.
end
Closes the admin session. The Logout, Shutdown, and Reset Switch commands will also end an
admin session.
cancel
Terminates an admin session opened by another user. Use this keyword with care because it
terminates the admin session without warning the other user and without saving pending
changes.
Notes
Closing a Telnet window during an admin session does not release the session. In this case, you must
either wait for the admin session to time out, or use the Admin Cancel command.
Examples
The following example shows how to open and close an admin session.
FCSM: user1> admin start
FCSM: (admin) user1>
.
.
.
FCSM (admin): user1> admin end
FCSM: user1>
Intel® Server Switch Module SBCEFCSW
7