Table of Contents
Advertisement
• Port speed
• Port media
See "Monitoring port status" on page 107 for more information about these displays.
Working with ports
Ports are selectable and serve as access points for other windows and menus. You select ports to
display information about them in the data window or to modify them. You cannot use the SAN
Utility to select internal bays and external ports at the same time; you must select either internal bays
or external ports. Context-sensitive pop-up menus and properties windows are accessible through the
Faceplate window and port icons.
Selecting ports
When you select a port, the port is highlighted with a white border. You can select ports in the
following ways:
• To select one port, click the port in the Faceplate display.
• To select a range of either internal or external consecutive ports, select a port and then press and
hold the shift key and select another port. The application selects both end ports and all ports in
between in port number.
• To select several nonconsecutive ports, hold the Ctrl key while selecting ports.
• To select all external ports, right-click anywhere on the switch module faceplate, and select
Select All Ports from the pop-up menu. To select all internal ports, click any blade server and
select All Ports from the pop-up menu.
To cancel a selection, press and hold the Ctrl key and select it again.
Opening pop-up menus
You can manage the switch module and its ports using the following methods:
• To open the pop-up menu, right-click anywhere in the graphic window. If no ports are selected,
port specific tasks are unavailable in the menu.
• To select one or more ports and open the Port pop-up menu, right-click a port.
Faceplate data window tabs
The Faceplate Data window contains six tabs at the bottom of the display. When you click a tab, the
following information is displayed:
• Name Server - Click the Name Server tab to display all devices connected to the switch
module that are logged with the name server.
• Switch - Click the Switch tab to display the current switch module configuration data.
• Port Statistics - Click the Port Stats tab to display the port performance data for the selected
port.
• Port Information - Click the Port Info tab to display the port detail information for the selected
port.
• Configured Zonesets - Click the Configured Zonesets tab to display all zone sets, zones, and
zone membership in the zoning database.
• Alarm Log - Click the Alarm Log tab to display the system error information.
76
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
