Table of Contents
Advertisement
Zoning command
Opens a Zoning Edit session in which to create and manage zone sets and zones. See the "Zone
command" on page 59" and the "Zoneset command" on page 62" for information about managing
zone and zone sets.
Authority
Admin. The List keyword is available with User authority.
Syntax
zoning
active
cancel
clear
edit
history
limits
list
restore
save
Keywords
active
Displays membership information for the active zone set including member zones and zone
members.
cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the zoning database. This keyword
does not affect the nonvolatile zoning database. However, if you enter the Zoning Clear
command followed by the Zoning Save command, the nonvolatile zoning database will be
cleared from the switch. The preferred method for clearing the zoning database from the switch
is the Reset Zoning command.
edit
Opens a Zoning Edit session.
history
Displays a history of zoning modifications including the following:
• Time of the most recent zone set activation or deactivation and the user who performed it
• Time of the most recent modifications to the zoning database and the user who made them.
• Checksum for the zoning database.
limits
Displays the maximum limits imposed on the zoning database for the number of zone sets,
zones, aliases, members per zone, members per alias, and total members.
list
Lists all fabric zoning definitions. This keyword is available with User authority.
64
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
Advertisement
Table of Contents
